Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material…
Said Bensaada, Mohamed Tewfik Bouziane, Ferhat Mohammedi
The precipitation in the alloy Al-Mg system has been the subject of many theoritical and experimental investigations that have contributed to the understanding of the different mechanisms which control them. The purpose of this work is to clarify the effect o…
Pengju Liu, Xia Fang, Yongming Tang, Chunning Sun, Cheng Yao
Two 5-substituted tetrazoles, 5-(2-thienyl)-1,2,3,4-tetrazole (2-THTT) and 5-(4-pyridyl)-1,2,3,4-tetrazole (4-PYTT), as copper corrosion inhibitors in aerated 0.5 M H<sub>2</sub>SO<sub>4</sub> solution were studied by using potentiodynamic polarization, elect…
Tayeb Chieb, Kamel Belmokre, Mohammed Benmessaoud, Sidi El Hassane Drissi, Najat Hajjaji, Abdellah Srhiri
The effect of 3-methyl 4-amino 1,2,4 triazole (MATA) on the corrosion behaviour of copper-nickel 70 - 30 (Monel) in NaCl 3% solution is investigated at 298 K by weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS′) methods.…
Geroge C. S. Anselmo, Walman Benicio de Castro, Carlos J. de Araújo
The ribbons of the Ti<sub>45.3</sub>Ni<sub>54.7</sub> shape memory alloy were prepared through the melt spinning technique. The study was focused on investigating the effect of the rapid solidification and grain size at characteristic start martensitic (M<sub…
Luis Castañeda
Luis Casta ñ eda’s article, "Present Status of the Development and Application of Transparent Conductors Oxide Thin Solid Films ", has been retraced by Ray Boxman because of plagiarism. The scientific community takes a very strong view on this matter an…
Vu Van Hung, Le Dai Thanh
Thermodynamic properties of diamond cubic and zinc-blende semiconductors with point defects are considered by the statistical moment method (SMM). The thermal expansion coefficient, the specific heats at constant volume and those at constant pressure, C<sub>V…
Andrey V. Sidorak, Viktor V. Ivanov, Alexander A. Shubin
Cadmium meta- and orthostannate were synthesized by thermal treatment using the coprecipitation method. Tin (IV) chloride, cadmium acetate were used as the initial components, the ammonium carbonate was a precipitant. The coprecipitated compounds and the ther…
Fethi Smaili
The effects of annealing of CuIn<sub>1–x</sub>Al<sub>x</sub>S<sub>2</sub>thin films for different temperature, which were grown by thermal evaporation, were investigated through X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS) and optical absor…
Ilkham G. Atabaev, Tojiddin M. Saliev, Dilmurad Saidov, Vadim A. Pak, Khimmatali Juraev, Chin-Che Tin, Bakhtiyar G. Atabaev, Vyacheslav N. Giryansky
The low temperature diffusion of Boron in bulk SiC crystals is investigated and simplified model of such diffusion is presented. The method of UV stimulated etching by aqueous solution of KOH is proposed and some experimental data on influence of defects on q…
Malika Abba, Ahmed Boutarfaia
The structural, the dielectric, and the piezoelectric properties of new ferroelectric Pb<sub>0.95</sub>La<sub>0.05</sub>[Zr<sub>x</sub>Ti<sub>(0.95–x)</sub>(Mo<sub>1/3</sub>,In<sub>2/3</sub>)<sub>0.05</sub>]<sub>0.9875</sub>O<sub>3</sub>(0.46 ≤ x ≤ 0.55) cera…
No articles in this issue.
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).