ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material…
Herve Goure Doubi, Alfred Niamien Kouamé, Léon Koffi Konan, Monique Tognonvi, Samuel Oyetola
Currently, in a context of sustainable development, the economic and environmental challenges incite, to valorize local materials such as clays and agro-industrial waste. It is in this approach that a new category of compressed earth bricks (BTC) stabilized w…
Kazuya Hatano, Yuuki Asano, Yuuto Kameda, Akira Koshio, Fumio Kokai
Germanium (Ge)-carbon (C) core-shell nanowires (NWs), 15 - 80 nm thick and <1 μm long, were grown using continuous-wave laser vaporization of Ge-graphite composite targets in high pressure (0.1 - 0.9 MPa) Ar gas. The NW core was crystalline Ge and the shell w…
Alexander F. Courtier, James A. Grant-Jacob, Rand Ismaeel, Daniel J. Heath, Gilberto Brambilla, William J. Stewart, Robert W. Eason, Ben Mills
Highly porous nanofoam can be fabricated via multiphoton ablation of a material by raster-scanning femtosecond laser pulses over the material surface. Here, we show the fabrication of nanofoam on the inside surface of a hollow silica capillary that has an inn…
Kenan Büyükkaya
The polymethyl-methacrylate (PMMA)-based composites were prepared using goose feather fibers at different diameters. The fibers, which were washed and dried, cut through the shaft, and their sizes were shrunk to short fiber form. Then the obtained short fiber…
Yibor Fabrice Roland Bako, Boukare Kabore, Issa Tapsoba
3-methyl-4-nitrophenol (MNP) is the main by-product of the organophosphate insecticide fenitrothion (FT), used in locust control. MNP is highly toxic because it is an endocrine disruptor and then may cause adverse in the biological systems. Then, it is necess…
Graciele Vieira Barbosa, Maria Aparecida Zaghete, Rafael Aparecido Ciola Amoresi, Margarete Soares da Silva, Alberto Adriano Cavalheiro, Rogério Cesar de Lara da Silva
Hydrotalcite-type anionic clays are a group of important materials used in adsorption processes, mainly for organic pollutants removal due the layered double hydroxide structure. The layer-interlayer interactions provide a structural memory even after dehydra…
Wei Zhao, Yun Wang, Aijian Wang
Polypyrrole (PPy) and its derivatives containing different were synthesized by the interfacial polymerization reaction using ammonium per sulfate as oxidant, and were characterized by using Fourier transform infrared, Ultraviolet/visible absorption, and Raman…
Laurent Jacques, Abderrazak El Ouafi
This paper presents an experimentally validated weld joint shape and dimensions predictive 3D modeling for low carbon galvanized steel in butt-joint configurations. The proposed modelling approach is based on metallurgical transformations using temperature de…
Yasumitsu Matsuo, Hiroki Ikeda, Takashi Kawabata, Junko Hatori, Hiroshi Oyama
We have fabricated the fuel cell based on the tissue derived biomaterial “collagen” and investigated its proton transfer. It was found that “collagen” becomes the electrolyte of fuel cell in the humidified condition. The power density of the fuel cell becomes…
Honei Chin, Chavin Jongwannasiri, Shuichi Watanabe
In this article, the results obtained from a study on multilayer diamond-like carbon and boron nitride (DLC/BN) films are reported. The microstructure, atomic concentration, hardness and friction coefficient of the films were characterized using transmission…
No articles in this issue.
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).