ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss…
Ebenezer Ekow Mensah, Raba’ah Syahidah Azis, Zulkifly Abbas
The aim of this study was to fabricate multi-layered recycled α -Fe 2 O 3 /OPEFB fiber/PCL composites for microwave absorbing applications in the 1 - 4 GHz frequency range. The multi-layered composites were 6 mm thick and each consisted of a 2 mm thick layer…
Naomu Takahashi, Mikito Kitayama
To fabricate polydopamine-sensitized solar cells with improved solar power conversion efficiency, the effects of pH, buffer, adsorption time and electrode potential for the electrochemical oxidation and polymerization of dopamine on TiO 2 film were investigat…
Regean Pitiya, Lubang Jacob, Rakotonirina Judye Emilinot
Global water shortage is caused not just by the physical scarcity of water, but also by gradual deterioration of the quality of water resources such as lakes, streams and rivers with heavy metals. This present study evaluated the status of Mn, Fe, Cr, Cu, Ni,…
Takehiro Esaki, Yuichi Sugai
In this study, we evaluated the SrBr 2 hydration reaction rate on repeated cycling. It was estimated that hydrated SrBr 2 particles were expanded by hydration and condensed to form secondary particles; thus, the hydration reaction was reduced by repeated cycl…
Aristide Herlyn Wilfrid Nakavoua, Emmanuelle Surya Ouenadio, Pascale Ursula Nkoua-Ouassamo, Vincent Verney
The strength of starch-based bioplastics is a challenge, we tried to overcome this limitation by using electromagnetic radiation in the visible range. Synthetically obtained retrograde bioplastics were subjected to radiation from an Edison-type incandescent l…
Socorro Valdez Rodriguez, Martin Ignacio Pech-Canul, Hugo Rojas, Oscar Sotelo, Francisco Javier Rodríguez, Araceli Espinoza-Vazquez, Ociel Rodríguez
An ionic fluid based on aromatic heterocyclic family constituted by 1,3-diazole groups was investigated. The purpose is to describe their electrochemical characteristics in order to identify the strategy to avoid the A36 carbon steel surface degradation by us…
Ren Matsushima, Mikito Kitayama
Y-Si compounds with the composition of Y:Si = 1:2 were fabricated using Yttrium and Silicon raw powders with low and high purity in various atmospheres and temperatures. Although the latest Y-Si phase diagram shows that the α - and β -YSi 2 phases are the sta…
Élcio Nogueira
This work aims to establish comparisons between two models used for the performance of heat exchangers. The chosen system, in this case, consists of a heat exchanger used in automotive radiators flat finned tube type. Water and ethylene glycol compound as bas…
Youssouf Sawadogo, Moustapha Sawadogo, Moussa Ouédraogo, Mohamed Seynou, Gisèle Lecomte-Nana, Philippe Blanchart, Moussa Gomina, Lamine Zerbo
Formulation of traditional hard porcelain generally requires 50% kaolin, 25% silica and 25% feldspar. Four porcelains formulation using the casting method, were prepared with different percentages of kaolinitic clay, sand and pegmatite referenced respectively…
Mohamed Hamdi, Messaoud Benamira
In this study, Si-doped Cu 2 ZnSnS 4 compounds (Cu 2 ZnSn 1-x Si x S 4 , 0 ≤ x ≤ 1) were prepared by solid state reaction method for use of materials for photovoltaic cells. The structural and spectroscopic properties of the as-prepared compounds were studied…
No articles in this issue.
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).