ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo…
A.V. Adedayo, S.A. Ibitoye, O.O. Oluwole, K.M. Oluwasegun
Thermomechanical treatment on cast Al-Si-Cu alloy (LM4) was carried out. The aim is to determine effects of degree of cold work, slurry thermal treatment and soaking time on the tensile strength, ductility, hardness and microstructure of the alloy. LM4 was pr…
Chukwutoo Christopher Ihueze, Alfred Nwabunwanne. Enetanya
This paper utilized the compressive tests results to establish some critical mechanical properties and crashworthiness parameters that may be required to design GRP composites of polyester matrix in automobile structures. Third order polynomial function was u…
K.A. Bello, S.B. Hassan, O. Aponbiede
A new high strength steel with dual matrix structure and exceptionally high toughness plus ductility have been produced by intermediate quenching of 0.22_wt% C microalloyed steel. The treatment consisted of initial austenitization and rapid quenching of the s…
Sudip Mondal, Biswanath Mondal, Apurba Dey, Sudit S. Mukhopadhyay
Development of suitable materials that acts as an interface between the implant and tissues in body system structurally, mechanically and bio functionally is important for the success of tissue engineering. This motivated materials scientists and biologists t…
Anil Jindal
Hole making had long been recognized as the most prominent machining process, requiring specialized techniques to achieve optimum cutting condition. Drilling can be described as a process where a multi-point tool is used to remove unwanted materials to produc…
A. Andrews, E. Gikunoo, B. K. Kyei-Fram, R. Sarfo
Small scale foundries in Ghana are in search of a suitable coke for their foundry operations since there is no coal mine in Ghana. Two grades of spent prebaked aluminium carbon anodes (herein referred to as grade P and grade K), which are remnants from the al…
K. J. Akinluwade, A. R. Adetunji, M. O. Adeoye, L. E. Umoru, P. N. Kalu, A. T. Taiwo, O. O. Adewoye
A safe and environmentally friendly cyaniding method has been developed to mitigate the toxic impacts of cyanide salts on the environment during conventional cyaniding. The method entails in-situ diffusion of nascent cyanide from mature cassava leaves into th…
Mamdouh Eissa, Hoda El-Faramawy, Azza Ahmed, Saeed Nabil, Hossam Halfa
This study has been performed to investigate the different parameters affecting on the production of high carbon ferromanganese in closed submerged arc furnace. The analysis of industrial data revealed that using manganese ores with low Mn/Fe ratio necessitat…
B. Rajagopal, A.V. Sarma, M.V. Ramana
The dielectric and thermal analysis of copper doped Magnesium Hydrogen Maleate Hexahydrate single crystals are studied for the first time. The dielectric constant, loss tangent, a.c. conductivity and a.c. activation energy were measured with variation of freq…
P. O. Aiyedun, O. S. Igbudu, B.O. Bolaji
Rolling torque for a seventeen passes, 125 x 125 mm HC SS316 billets rolled to a 16 mm diameter rod have been simulated. Torque calculations based on pressure exerted by the metal on the rolls and the area of contact during longitudinal rolling were obtained…
No articles in this issue.
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).