ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Electronics Cooling and Thermal Control (JECTC) is a quarterly, peer-reviewed, academic journal. It aims to provide a vehicle for the exchange and dissemination of original research results, technical notes, and state-of-the-art reviews pertaining to the electronic cooling and thermal system control tec…
Mousa M. Mohamed
The removal building heat load and electrical power consumption by air conditioning system are proportional to the outside conditions and solar radiation intensity. Building construction materials has substantial effects on the transmission heat through outer…
Hasan Abbasinejad, Reza Hoseini Abardeh
This paper aims to model a subcooled flow boiling in a vertical stainless-steel micro-channel with an upward flow in 1 mm diameter, 40 mm length and 0.325 mm thickness tube. Water has been considered as a working fluid. The heat flux varies from 600 - 750 kW…
Zviad Kovziridze
Goal : Formulation of empiric formula, which establishes relations between major matrix parameters of ceramic materials and composites and the coefficient of resistance to material thermogradient. Method : Harcpurt’s method of cooling of water in boiling regi…
Zviad Kovziridze
Goal : In the process of exploitation of ceramic composites often we encounter not only high mechanical stresses but also thermal loads and air-thermal shocks. These loads are transformed into failure/rupture stress energy, when strength of work-pieces is les…
Nooshien Laderian, Arash Daghighi
In this paper, thermal effects and Drain Induced barrier lowering (DIBL) of silicon-on-insulator (SOI) and silicon-on-diamond (SOD) transistors with 22 nm channel lengths using hydrodynamic simulations have been investigated. Thermal conductivity of diamond i…
Ai Ueno, Kohei Yamada, Kikuko Miyata, Hosei Nagano
In previous years, several high-power micro-satellites below ~100 kg have been developed for high-functional spacecraft. This paper proposes a functional and high-power thermal control system with no power supply and a simple configuration for micro-satellite…
Ibrahim M. Abdel-Motaleb, Syed M. Qadri
To optimize the performance of a thermoelectric device for a specific application, the device should be uniquely designed for the application. Achieving an optimum design requires accurate measurements and credible analysis to evaluate the performance of the…
Zviad Kovziridze, Natela Nijaradze, Gulnaz Tabatadze, Teimuraz Cheishvili, Maia Mshvildadze, Zviad Mestvirishvili, Vera Kinkladze, Nino Daraxvelidze
Goal: obtaining of composite in the SiC-SiAlON system with the metal thermal method in the nitrogen medium. Method: SiALON-s are solid metal oxide solutions in nitrides. Area of their presence is considered in four-component system-Si 3 N 4 -ALN-AL 2 O 3 -SiO…
Yasushi Koito, Toshio Tomimura
By placing a sample between a heated and a cooled rod, a thermal conductivity of the sample can be evaluated easily with the assumption of a one-dimensional heat flow. However, a three-dimensional constriction/spreading heat flow may occur inside the rods whe…
Yuchen Xi
The electrocaloric effect (ECE) is defined as the fact that the temperature of dielectric material changes, when an electric field is applied to or removed from the material [1]. It might be a possible solution for the increasing energy consumption for therma…
No articles in this issue.
The Journal of Electronics Cooling and Thermal Control (JECTC) is a quarterly, peer-reviewed, academic journal. It aims to provide a vehicle for the exchange and dissemination of original research results, technical notes, and state-of-the-art reviews pertaining to the electronic cooling and thermal system control tec… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).