ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo…
Işıl Aydın, Fırat Aydın, Recep Ziyadanoğulları
In this study, the ash was sulfurized in an autoclave before flotation. The sulfurization process was conducted at different amounts of H 2 S and H 2 O steam. The flotation process was continued with the obtained samples. By flotation of the sample obtained f…
Shangzhao Shi, Jiann-Yang Hwang, Bowen Li, Xiaodi Huang
The presented work was an investigation on the sintering of magnesium fluoride with microwaves. The sintering was conducted in a 2.45-GHz microwave applicator under an argon atmosphere. Sintering shrinkage and density were measured. The microstructure of the…
M.O. Adeoye, O.O. Adewoye
Tourmaline is a ring silicate material with a hexagonal crystal structure. Tourmaline crystal is made use of as an electronic component, e.g, as a transducer, mainly because of the anisotropy it exhibits in its properties. Microindentation technique was emplo…
K.Q. Qiu, Y.L. Ren
The Zr 57 Al 10 Nb 5 Cu 15.4 Ni 12.6 bulk metallic glass-forming alloy is reinforced with tungsten fiber. Cylindrical samples up to 6.3 mm in diameter and 7cm in length have been synthesized using melt infiltration casting method. The structure and microstruc…
Guihua Liao, Keying He, Liusheng Li, Mingxue Jiang
Andalusite (Al 2 O 3 SiO 2 ) is a member of the alumino-silicate minerals. Because of having excellent high temperature volume stability, mechanical strength, thermal shock resistance and creep resistance, the refractories made from andalusite have been used…
Gerard T. Caneba, Jay Axland
Single-walled carbon nanotubes (SWCNTs) are uniquely suitable as lightweight electrically and thermally conductive materials. However, due to their tendency to agglomerate into fiber bundles and relatively weak adhesion to other materials, it has always been…
Suryasarathi Bose, P.A. Mahanwar
Fillers are used along with various commodities as well as engineering polymers to improve the properties of polymers. The performance of filled polymers is generally determined on the basis of the interface attraction of filler and polymers. Fillers of widel…
T. Kinoshita, S. Akita, S. Ozawa, S. Nii, F. Kawaizumi, K. Takahashi
A continuous recovery of Au(III) via foam separation from its hydrochloric acid solutions was studied using a nonionic surfactant: polyoxyethylene nonyl phenyl ether having 20 ethylene oxide units (PONPE20). The surfactant showed a strong affinity to Au(III)…
Jinjing Luo, J.Y. Hwang, B. C. Greenlund, Zhiyong Xu
Unburned carbons from fly ash were leached with concentrated HF acid solutions in this study. The mercury adsorption abilities of the treated unburned carbons were examined. Effects of temperature, contact time, preloaded mercury emission and gaseous mercury…
H. K. Lin, H. V. Luong
Metallic Fenton reaction was found to be more effective than classical Fenton reaction in decomposing Pentachlorophenol (PCP) in contaminated soil. The combination of metallic iron and hydrogen peroxide was used in column leaching experiments to simulate heap…
No articles in this issue.
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).