ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss…
Antonio D. Rodriguez-Lopez, Jose Garcia-Garrido, Cynthia Perez-Ramiro, Esperanza M. Garcia-Castello
During textile manufacturing, huge amounts of wastewaters characterized by removed impurities and high concentrations of dye are produced. These wastewaters cause several problems when they are discharged to the environment. The use of ozone in wastewater tre…
N. I. Baurova, Wei Hao, Ouyang Xiao
This study is the investigation of the microstructure of different types of carbon fiber. They were compared with the carbonized and graphitized fibers. Results of structural researches have been presented. It was found that the damage varies from different p…
Galina Malysheva, Lianhe Liu, Xiao Ouyang, Oleg Kulakov
This article presents the results of deformation-strength properties measurement and microstructural analysis of heterogeneous polymer matrix consisting of thermoset and thermoplastic polymers. Thermosetting material is a diamino-diphenil sulfon-cured epoxy o…
Cheng Yang, Shengdun Zhao
Based on the structure analysis of alternator poles, two closed die forging steps in one heat forming process of alternator poles were put forward, as well as the forming die system. Firstly, a thicker bottom base of alternator poles was per-formed by radial…
N. Kosarev, M. Khazin, R. Apakashev, N. Valiev
Mechanical properties of electrodeposited and electroless copper with nano- and crystalline structure are considered. Grain diameters in films ranged from 0.06 to 8 μm. A model is described which takes into account the grain boundary hardening and density of…
G. Sarsenbay, L. A. Myltykbaeva, R. A. Abdulwalyev, B. M. Sukurov
The influence of the precipitating reagents and dispersants on the formation of nano-aluminum hydroxide from sodium aluminate solution by chemical precipitation was investigated. The influence of the dispersed seeds on the decomposi-tion process was investiga…
Xiaoxia Liang, Qiaojia Fan
Sub-critical water extraction is a brand-new separation technology. This paper mainly discussed the principle, advantages of sub-critical water extraction, and its applications ranging from the medicinal plants traditionally used in Europe and Asia to produce…
Z. P. Ling, J. Ge, R. Stangl, A. G. Aberle, T. Mueller
Hydrogenated doped silicon thin films deposited using RF (13.56 MHz) PECVD were studied in detail using micro Raman spectroscopy to investigate the impact of doping gas flow, film thickness, and substrate type on the film charac teristics. In particular, by d…
Xianming Qin, Ying Cheng, Kesheng Zhou, Shengxiang Huang, Xia Hui
MnZn-doped W-type barium cobalt ferrite powder composites of Ba(MnZn) x Co 2(1-x) Fe 16 O 27 (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were prepared in a sol-gel process. The microwave absorbing properties of the composites in the range of 2 - 18 GHz and their electr…
Tetsuya Kadoyama, Jun Yamasaki, Futo Tsumuji, Satoshi Takamiya, Shou Ogihara, Daiki Hoshino, Yasushiro Nishioka
Organic soft linear actuators were fabricated using galvanostatic electropolymerization of the polypyrrole (PPy) thin film using a methyl benzoate electrolyte solution of N,N - Diethyl-N-methyl-N-(2-methoxyethyl) ammonium bis (trifluoromethanesulfonyl) imide.…
No articles in this issue.
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).